Section 43 (Navigation System): Multi-Display: Installation

WARNING: This page is about a different car, the 2007 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL MULTI-DISPLAY ASSEMBLY
1. Connect the connector and install the multi-display.
2. Install the 2 bolts.
INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY (See INSTALLATION )
INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Fig 1: Installing Multi-Display Assembly
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.