Inspection Procedure

WARNING: This page is about a different car, the 2007 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

CHECK MULTI-DISPLAY
1. Turn the power switch ON (ACC).
2. Keep pressing the MAP eject switch for 5 seconds and check if the disc is ejected by forced ejection.
  OK: The disc is ejected.
NG: PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE

OK: Go to Next Step
CHECK MAP DISC
1. Check that the map disc is not deformed or cracked.
  OK: No deformations or cracks on the map disc.
NG: REPLACE MAP DISC

Fig 1: Checking Disc For Deformed Or Cracked
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

OK: END