Inspection Procedure

WARNING: This page is about a different car, the 2007 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

CHECK MAP DISC
1. Check that the map disc is not deformed or cracked.
  OK: No deformations or cracks on map disc.
NG: REPLACE MAP DISC

Fig 1: Identifying Wrong Method Of Disc Cleaning
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

OK: Go to Next Step
SET DESTINATION
1. Set another destination and check if the system can calculate the route correctly.
  OK: Route can be correctly calculated.
NG: PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE

OK: END