LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Land Cruiser >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System >> Road Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Road Test

  1. INSPECT SET SWITCH 
    1. Push the main switch ON.
    2. Drive at a desired speed (40 km/h (25 mph) or higher).
    3. Press the control switch to the -/SET.
    4. After releasing the switch, check that the vehicle cruises at the desired speed.
      Fig 1: Identifying Cruise Control Main Switch Position (Set Switch)
      G04438469Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT "+" SWITCH 
    1. Push the main switch button to ON.
    2. Drive at a desired speed (40 km/h (25 mph) or higher).
    3. Press the control switch to the -/SET.
    4. Check that the vehicle speed increases while the control switch is pulled up to +/RES, and that the vehicle cruises at the set speed when the switch is released.
    5. Momentarily press the control switch upward to +/RES and then immediately release it. Check that the vehicle speed increases by about 1.6 km/h (1 mph) (Tap-up function).
      Fig 2: Identifying Cruise Control Main Switch Position ("+" Switch)
      G04438470Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSPECT "-" SWITCH 
    1. Push the main switch button to ON.
    2. Drive at a desired speed (40 km/h (25 mph) or higher).
    3. Press the control switch to the -/SET.
    4. Check that the vehicle speed decreases while the control switch is pushed down to -/SET, and the vehicle cruises at the set speed when the switch is released.
    5. Momentarily press the control switch downward to -/SET, and then immediately release it. Check that the vehicle speed decreases by about 1.6 km/h (1 mph) (Tap-down function).
      Fig 3: Identifying Cruise Control Main Switch Position ("-" Switch)
      G04438471Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSPECT CANCEL SWITCH 
    1. Push the main switch button to ON.
    2. Drive at a desired speed (40 km/h (25 mph) or higher).
    3. Press the control switch to the -/SET.
    4. When operating one of the following, check that the cruise control system is canceled and that the normal driving mode is reset.
      • Depress the brake pedal
      • Shift to except D or 4 position
      • Push the main switch button to OFF
      • Push the cruise control switch to CANCEL
        Fig 4: Identifying Cruise Control Main Switch Position (Cancel Switch)
        G04438472Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSPECT RES (RESUME) SWITCH 
    1. Push the main switch button to ON.
    2. Drive at a desired speed (40 km/h (25 mph) or higher).
    3. Press the control switch to the -/SET.
    4. When operating one of the following, check that the cruise control system is canceled and that the normal driving mode is reset.
      • Depress the brake pedal
      • Shift to except D or 4 position
      • Push the cruise control switch to CANCEL
    5. After the control switch is pulled up to +/RES at a driving speed of more than 40 km/h (25 mph), check that the vehicle restores the speed before the cancellation.
      Fig 5: Identifying Cruise Control Main Switch Position (RES (Resume) Switch)
      G04438473Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals