Inspection Procedure
- CHECK THAT CD IS INSERTED PROPERLY
- Is CD inserted with correct side up?
- NG: INSERT CORRECTLY
- OK: GO TO NEXT STEP
- CHECK IF PROPER CD IS INSERTED
- Function OK if different CD inserted.
OK: CD is not different.
- NG: CD FAULTY
- OK: GO TO NEXT STEP
- Function OK if different CD inserted.
- CHECK RADIO
- Is radio operating normally?
- NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
- OK: GO TO NEXT STEP
- CHECK CABIN TEMPERATURE
- Is temperature inside cabin hot?
OK: Inside cabin is hot.
- NG: PROTECTIVE CIRCUIT IN OPERATION
- OK: GO TO NEXT STEP
- Is temperature inside cabin hot?
- DID TEMPERATURE IN CABIN CHANGE RAPIDLY?
- Has rapidly temperature change occurred inside cabin?
OK: Rapid temperature change occurred.
- OK: FORMATION OF CONDENSATION DUE TO TEMPERATURE CHANGES
- NG: REPLACE RADIO RECEIVER ASSEMBLY
- Has rapidly temperature change occurred inside cabin?