LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Matrix Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> Engine Control System (1ZZ-FE) >> Accelerator Pedal >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Accelerator Pedal: Inspection

  1. INSPECT ACCELERATOR PEDAL ASSEMBLY 
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

        Resistance 

        RESISTANCE SPECIFICATIONS

        Tester Connection Specified Condition
        3 (EP1) - 6 (VCP1) 1.5 to 6.0 kΩ
        1 (EP2) - 4 (VCP2) 1.5 to 6.0 kΩ

        If the result is not as specified, replace the accelerator pedal.

        Fig 1: Checking Accelerator Pedal Assembly Resistance
        G05192751Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals