How To Proceed With Troubleshooting

HINT:

Troubleshoot in accordance with the procedures.

1. VEHICLE BROUGHT TO WORKSHOP 
2. CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK 
   1. Interview the customer to confirm the trouble (See HOW TO PROCEED WITH TROUBLESHOOTING ).
3. PROBLEM SYMPTOM TABLE 
   1. If the fault is not listed on the problem symptoms table, proceed to A.
   2. If the fault is listed on the problem symptoms table, proceed to B.

   B: Go to step  5

   A: Go to Next Step 

4. CIRCUIT INSPECTION AND PART INSPECTION 
5. PERFORM TROUBLESHOOTING IN THE FOLLOWING METHOD, DEPENDING ON MALFUNCTION SYMPTOM 
   1. Terminals of ECU (See TERMINALS OF ECU  )
6. ADJUSTMENT, REPAIR OR REPLACEMENT 
7. CONFIRMATION TEST 

   NEXT: END