LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Tacoma Base, 2D Pickup, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control System (2TR-FE) >> ECM >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Control System (2TR-FE): ECM: Removal

NOTE: Perform REGISTRATION (VIN registration) when replacing the ECM (see REGISTRATION  ).
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY  (See REMOVAL )
  3. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER RH  (See REMOVAL )
  4. REMOVE ECM 
    1. Disconnect the 4 connectors.
    2. Remove the 2 bolts and nut, then remove the ECM.
      Fig 1: Removing ECM Nuts And Bolts
      G05198448Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
  5. REMOVE ECM BRACKET 
    1. Remove the 3 screws, then remove the ECM bracket.
      Fig 2: Removing ECM Bracket
      G05198034Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
  6. REMOVE ECM BRACKET NO.2 
    1. Remove the 2 screws, then remove the ECM bracket No. 2.
scientia non olet · About LEMON Manuals