LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Tundra Base, 5.7 V, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (3UR-FE) - System Testing, Removal & Installation >> Engine Coolant Temperature Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Coolant Temperature Sensor: Installation

  1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR 
    1. Install a new gasket to the sensor.
    2. Install the sensor.

      Torque: 20 N*m (200 kgf*cm, 14 ft.*lbf) 

    3. Connect the sensor connector.
    Fig 1: Locating Engine Coolant Temperature Sensor
    G05150045Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. ADD ENGINE COOLANT  (See REPLACEMENT )
  3. INSPECT FOR COOLANT LEAK  (See ON-VEHICLE INSPECTION )
  4. INSTALL V - BANK COVER SUB-ASSEMBLY  (See INSTALLATION )
  5. INSTALL NO. 1 ENGINE UNDER COVER  (See REPLACEMENT )
scientia non olet · About LEMON Manuals