LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Tundra Base, 5.7 V, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (3UR-FE) - System Testing, Removal & Installation >> Knock Sensor >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Knock Sensor: Inspection

  1. INSPECT KNOCK SENSOR 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      KNOCK SENSOR

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 120 k to 280 kΩ

      If the result is not as specified, replace the sensor.

      Fig 1: Inspecting Knock Sensor
      G04943092Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals