Crankshaft Position Sensor: Inspection
- INSPECT CRANKSHAFT POSITION SENSOR
- Check the resistance.
- Using an ohmmeter, measure the resistance between the terminals.
Standard resistance
RESISTANCE SPECIFICATION TABLETemperature Specified Condition Cold 985 to 1,600 Ω Hot 1,265 to 1,890 Ω Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
HINT:
In RESISTANCE SPECIFICATION TABLE , the terms Cold and Hot refer to the temperature of the coils. Cold means approximately -10 to 50°C (14 to 122°F). Hot means approximately 50 to 100°C (122 to 212°F).
If the resistance is not as specified, replace the crankshaft position sensor.
- Using an ohmmeter, measure the resistance between the terminals.
- Check the resistance.