Engine Coolant Temperature Sensor: Installation

INSTALL ENGINE COOLANT TEMPERATURE SENSOR
1. Provisionally install the engine coolant temperature sensor through a new gasket.
2. Using SST, tighten the engine coolant temperature sensor.
  SST 09817-33190
  
  Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)
  
  Fig 1: Identifying SST & Engine Coolant Temperature Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the engine coolant temperature sensor connector.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
ADD ENGINE COOLANT (See REPLACEMENT )
CHECK FOR ENGINE COOLANT LEAKAGE (See ON-VEHICLE INSPECTION )

Fig 2: Locating Engine Coolant Temperature Sensor Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002