Service Data
1NZ-FE ENGINE CONTROL SYSTEM - SERVICE DATA
| Camshaft timing oil control valve assembly | Standard resistance | 6.9 to 7.9 ohms at 20°C (68°F) |
| Camshaft position sensor | Standard resistance | 1, 630 to 2, 740 ohms at cold 2, 065 to 3, 225 ohms at hot |
| Crankshaft position sensor | Standard resistance | 985 to 1, 600 ohms at cold 1, 265 to 1, 890 ohms at hot |
| Engine coolant temperature sensor | Standard resistance | 2.32 to 2.59 k ohms Approximately 20°C (68°F) 0.310 to 0.326 k ohms Approximately 80°C (176°F) |
| Throttle with motor body assembly | Standard resistance 1 (M-) - 2 (M+) |
0.3 to 100 ohms at 20°C (68°F) |
| EFI (20A) fuse | Standard resistance 1-2 |
Below 1 ohms |
| Knock sensor | Standard resistance | 120 to 280 k ohms at 20°C (68°F) |
| Integration relay | A1-C1 | Below 1 ohms |
| A1-A4 | 10 k ohms or higher | |
| A4-C1 | 10 k ohms or higher | |
| A1-A4 | Below 1 ohms (Apply battery voltage between terminals A2 and A3) | |
| A4-C1 | Below 1 ohms (Apply battery voltage between terminals A2 and A3) | |
| Accelerator pedal position No. 1 standard voltage | Standard resistance Accelerator pedal released Accelerator pedal depressed |
0.5 to 1.1 V 2.6 to 4.5 V |
| Accelerator pedal position No. 2 standard voltage | Standard resistance Accelerator pedal released Accelerator pedal depressed |
1.2 to 2.0 V 3.4 to 5.0 V |