Engine Control System: ECM: Installation
- INSTALL ECM BRACKET NO. 2
- Install ECM bracket No. 2 with the 2 screws.
- INSTALL ECM BRACKET
- Install the ECM bracket with the 2 screws.
- INSTALL ECM
- Install the ECM with the bolt and 2 nuts.
Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
- Connect the 2 ECM connectors.
- Install the 2 lock knobs and harness clamp.
- Install the ECM with the bolt and 2 nuts.
- INSTALL COWL TOP PANEL OUTER (for Hatchback) (See INSTALLATION )
- INSTALL COWL TOP PANEL OUTER (for Sedan)
- Install the cowl top panel outer and install the 8 bolts.
Torque: 6.5 N*m (66 kgf*cm, 58 in.*lbf)
- Install the cowl top panel outer center bracket and install the 2 bolts.
Torque: 6.5 N*m (66 kgf*cm, 58 in.*lbf)
- Connect the wire harness and engage the claw.
- Install the cowl top panel outer and install the 8 bolts.
- INSTALL FRONT AIR SHUTTER SEAL (for Sedan)
- Install the front air shutter seal and engage the 3 claws.
- INSTALL COWL TO REGISTER DUCT SUB-ASSEMBLY NO. 2 (for Hatchback) (See INSTALLATION )
- INSTALL WINDSHIELD WIPER MOTOR AND LINK (for Hatchback) (See INSTALLATION )
- INSTALL WINDSHIELD WIPER MOTOR AND LINK (for Sedan) (See INSTALLATION )
- INSTALL COWL TOP VENTILATOR LOUVER LH (for Hatchback) (See INSTALLATION )
- INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY (for Hatchback) (See INSTALLATION )
- INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY (for Sedan) (See INSTALLATION )
- INSTALL HOOD TO COWL TOP SEAL (for Hatchback) (See INSTALLATION )
- INSTALL COWL SIDE VENTILATOR SUB-ASSEMBLY LH (for Sedan) (See INSTALLATION )
- INSTALL COWL SIDE VENTILATOR SUB-ASSEMBLY RH (for Sedan) (See INSTALLATION )
- INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH (for Hatchback) (See INSTALLATION )
- INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH (for Sedan) (See INSTALLATION )
- INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH (for Hatchback) (See INSTALLATION )
- INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH (for Sedan) (See INSTALLATION )
- INSTALL FRONT WIPER ARM HEAD CAP (for Hatchback) (See INSTALLATION )
- INSTALL FRONT WIPER ARM HEAD CAP (for Sedan) (See INSTALLATION )
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)