LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Avalon Limited >> Repair and Diagnosis (Single Page) >> Brakes >> Brakes Control Systems >> Brake Control System >> Steering Angle Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Steering Angle Sensor: Removal

  1. PRECAUTION  (See REMOVAL )
  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL  (See REMOVAL )
  3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD 
  4. REMOVE STEERING WHEEL COVER LOWER NO. 2  (See REMOVAL )
  5. REMOVE STEERING WHEEL COVER LOWER NO. 3  (See REMOVAL )
  6. REMOVE STEERING PAD  (See REMOVAL )
  7. REMOVE STEERING WHEEL ASSEMBLY  (See REMOVAL )
  8. REMOVE STEERING COLUMN COVER LOWER 
  9. REMOVE STEERING COLUMN COVER 
  10. REMOVE SPIRAL CABLE 
  11. REMOVE STEERING ANGLE SENSOR 
    1. Disengage the 6 claws and remove the steering angle sensor from the spiral cable.
      Fig 1: Identifying Steering Angle Sensor From Spiral Cable Claws
      G05001649Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals