System Outline

The CAN has two lines which operate as a pair and which communicate using operating voltage. The CAN has excellent data speed and error detecting capacity. It consists of vehicle control systems such as the engine control module, yaw rate sensor, skid control ECU with actuator, steering sensor, data link connector 3, distance control ECU and gateway ECU. The gateway ECU has communication circuits which correspond to different types of communication data. Different types of communication data can therefore be shared among communicating parts after it goes through gateway ECU.

This system is active for the following systems:

* ABS

* Air Conditioning

* Combination Meter

* Cruise Control

* Data Link Connector 3

* Door Lock Control

* Dynamic Radar Cruise Control

* Electronically Controlled Transmission and A/T Indicator

* Engine Control

* Mirror Heater

* Multi Display (w/o Navigation System)

* Navigation System

* Power Seat (Driver Seat w/ Driving Position Memory)

* Rear Window Defogger

* Remote Control Mirror (w/ Driving Position Memory)

* Smart Key System

* TRAC

* VSC