Service Data
SERVICE DATA SPECIFICATION CHART
| Front wheel alignment | Vehicle height | - | |
| XL | Front: A - B: | 122 mm (4.80 in.) | |
| Rear: D - C: | 45 mm (1.77 in.) | ||
| TOURING | Front: A - B: | 127 mm (5.00 in.) | |
| Rear: D - C: | 50 mm (1.97 in.) | ||
| XLS | Front: A - B: | 126 mm (4.96 in.) | |
| Rear: D - C: | 49 mm (1.93 in.) | ||
| LIMITED | Front: A - B: | 126 mm (4.96 in.) | |
| Rear: D - C: | 52 mm (2.05 in.) | ||
| Toe-in (total) | 0° +- 6' (0 +- 0.1°, 0 +- 1 mm, 0 +- 0.04 in.) | ||
| Wheel angle | - | ||
| XL | Inside wheel: | 38°37' +- 2° (38.62° +- 2°) | |
| Outside wheel: Reference: | 33°47' (33.78°) | ||
| TOURING | Inside wheel: | 38°27' +- 2° (38.45°+- 2°) | |
| Outside wheel: Reference: | 33°41' (33.68°) | ||
| XLS | Inside wheel: | 38°29' +- 2° (38.48° +- 2°) | |
| Outside wheel: Reference: | 33°43' (33.72°) | ||
| LIMITED | Inside wheel: | 38°27' +- 2° (38.45° +- 2°) | |
| Outside wheel: Reference: | 33°40' (33.67°) | ||
| Camber | XL: | -0°40' +- 45' (-0.67° +- 0.75°) | |
| TOURING: | -0°43' +- 45' (-0.72° +- 0.75°) | ||
| XLS: | -0°43' +- 45' (-0.72° +- 0.75°) | ||
| LIMITED: | -0°43' +- 45' (-0.72° +- 0.75°) | ||
| Right-left error: | 45' (0.75°) or less | ||
| Caster | XL: | 2°39' +- 45' (2.65° +- 0.75°) | |
| TOURING: | 2°43' +- 45" (2.72° +- 0.75°) | ||
| XLS: | 2°42' +- 45' (2.70° +- 0.75°) | ||
| LIMITED: | 2°48' +- 45' (2.80° +- 0.75°) | ||
| Right-left error | 45' (0.75°) or less | ||
| Steering axis inclination | XL: | 12°15' +- 45' (12.25° +- 0.75°) | |
| TOURING: | 12°22' +- 45' (12.37° +- 0.75°) | ||
| XLS: | 12°20' +- 45' (12.33° +- 0.75°) | ||
| LIMITED: | 12°20' +- 45' (12.33° +- 0.75°) | ||
| Right-left error | 45' (0.75°) or less | ||
| Front suspension | Lower ball joint turning torque | 0.98 to 3.43 N*m (10 to 35 kgf*cm, 8.7 to 30 in.*lbf) | |
| Stabilizer bar link ball joint turning torque | 0.05 to 1.96 N*m (0.5 to 20 kgf*cm, 0.4 to 17.4 in.*lbf) | ||
| A: Ground clearance of front wheel center B: Ground clearance of lower suspension arm No. 2 set bolt head center C: Ground clearance of strut rod set bolt center D: Ground clearance of rear wheel center |
|||
SERVICE DATA SPECIFICATION CHART
| Rear wheel alignment | Toe-in (total) | 0°24' 12' (0.40° +- 0.20°), 4 +- 2 mm (0.16 +- 0.08 in.) | |
| No. 2 lower suspension arm length difference | 1.5 mm (0.06 in.) or less | ||
| Camber | XL: | -1°09' +- 45' (-1.15° +- 0.75°) | |
| TOURING: | -1°13' +- 45' (-1.22° +- 0.75°) | ||
| XLS: | -1°13' +- 45'(-1.22° +- 0.75°) | ||
| LIMITED: | -1°15' +- 45' (-1.25° +- 0.75°) | ||
| Right-left error: | 45' (0.75°) or less | ||
| Rear suspension | Stabilizer link ball joint turning torque | 0.05 to 0.98 N*m (0.5 to 10 kgf*cm, 0.4 to 8.7 in.*lbf) | |