LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Camry Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Control System (Hybrid)) >> Initialization >> DTC P0111 Intake Air Temperature Sensor Gradient Too High >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

WARNING: This page is about a different variant/trim than selected.
  1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0111) 
    1. Connect Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the tester on.
    4. Select the following menu items: Powertrain / Engine / Trouble Codes.
    5. Read DTCs.

    Result 

    RESULT CHART

    Result Proceed to
    P0111 and other DTCs A
    P0111 B

    HINT:

    If any DTCs other than P0111 are output, troubleshoot those DTCs first.

    B: REPLACE MASS AIR FLOW METER 

    A:  Go to DTC CHART