How To Proceed With Troubleshooting

*: Use Techstream.

1. VEHICLE BROUGHT TO WORKSHOP 
2. CUSTOMER PROBLEM ANALYSIS 
3. CHECK AND CLEAR DTCS AND FREEZE FRAME DATA* 
4. PROBLEM SYMPTOM CONFIRMATION 
   • SYMPTOM DOES NOT OCCUR: GO TO STEP 5 
   • SYMPTOM OCCURS:  GO TO STEP  6
5. SYMPTOM SIMULATION 
6. DTC CHECK* 
   • THERE IS NO OUTPUT: GO TO STEP 7 
   • THERE IS OUTPUT:  GO TO STEP  8
7. PROBLEM SYMPTOMS TABLE 

   CHECK FOR FLUID LEAKAGE AND GO TO STEP  9

8. DTC CHART 

   CIRCUIT INSPECTION* 

9. IDENTIFICATION OF PROBLEM 
10. REPAIR 
11. CONFIRMATION TEST* 

    NEXT : END