Inspection Procedure

WARNING: This page is about a different car, the 2007 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.

CHECK NAVIGATION RECEIVER ASSEMBLY
1. Check if a disc is inserted into the MAP disc slot.
  1. Check if "DISC IN" is displayed.
    
    Fig 1: Locating DISC IN Switch
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    
    OK: "DISC IN" is displayed.
NG: EJECT DISC

OK: Go to next step
CHECK MAP DISC
1. Check that the map disc is not deformed or cracked.
  
  Fig 2: Precaution For Map Disc
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  OK: No deformations or cracks on map disc.
NG: REPLACE MAP DISC

OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE