Inspection Procedure

WARNING: This page is about a different car, the 2007 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.

CHECK PANEL SWITCH
1. Check for foreign matter around the switches that might prevent operation.
  OK: No foreign matter is found.
NG: REMOVE ANY FOREIGN MATTER FOUND

OK: Go to next step
CHECK PANEL SWITCH (DISPLAY CHECK MODE)

Fig 1: Screen Display - Panel Switch Check Mode
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Enter the "Display Check" mode (Panel Switch Check) (See DISPLAY CHECK MODE ).
2. Operate the abnormal switch and check if the switch name and status are correctly displayed.
  OK: The switch name and status are correctly displayed as operated.
NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE

OK: REPLACE NAVIGATION RECEIVER ASSEMBLY