How To Proceed With Troubleshooting

WARNING: This page is about a different car, the 2008 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

*: Use Techstream.

Vehicle Brought to Workshop
Customer Problem Analysis
Check and Clear DTCs and Freeze Frame Data*
HINT:

See FREEZE FRAME DATA
Problem Symptom Confirmation
Symptom does not occur: Go to step 5

Symptom occurs: Go to step 6
Symptom Simulation
HINT:

See ELECTRONIC CIRCUIT INSPECTION PROCEDURE
DTC Check*
HINT:

See DTC CHECK / CLEAR

There is no output: Go to step 7

There is output: Go to step 8
Problem Symptoms Table
HINT:

See PROBLEM SYMPTOMS TABLE

Check for fluid leakage and Go to step 10
DTC Chart
HINT:

See DIAGNOSTIC TROUBLE CODE CHART
Circuit Inspection*
HINT:

When 2 or more DTCs are detected, perform circuit inspection one by one until the problem is identified.
Identification of Problem
Repair
Confirmation Test*
End