Torque Specifications

WARNING: This page is about a different car, the 2007 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.

VANE PUMP ASSEMBLY (2AZ-FE):

VANE PUMP ASSEMBLY (2AZ-FE) - TORQUE SPECIFICATIONS

Part Tightened		N*m	kgf*cm	ft.*lbf
Housing rear x Housing front		22	224	16
Oil pressure switch		21	214	16
Pressure port union		69	704	51
Suction port union set bolt		12	122	9
Pump assembly set bolt	Bolt A	26 (37)	264 (377)	19 (27)
Pump assembly set bolt	Bolt B	37	377	27
Pressure feed tube assembly set union bolt		52	525	38

(): For use without SST

VANE PUMP ASSEMBLY (3MZ-FE):

VANE PUMP ASSEMBLY (3MZ-FE) - TORQUE SPECIFICATIONS

Part Tightened	N*m	kgf*cm	ft.lbf
Pump bracket front x Housing front	44	449	32
Housing rear x Housing front	24	245	18
Pump bracket rear x Housing rear	44	449	32
Pressure port union	83	846	61
Suction port union set bolt	13	133	10
Pump assembly set bolt	43	440	32
Pressure feed tube assembly set union bolt	52	525	38
Oil pressure switch	21	214	15

RACK AND PINION POWER STEERING GEAR ASSEMBLY

RACK AND PINION POWER STEERING GEAR ASSEMBLY - TORQUE SPECIFICATIONS

Part Tightened	N*m	kgf*cm	ft.lbf
Control valve housing set bolt	20	204	15
Control valve shaft lock nut	25	250	18
Rack housing cap	59	597	43
Rack guide spring cap lock nut	51 (69)	520 (699)	38(51)
Rack x Rack end sub-assembly	60 (84)	615(851)	45 (62)
Tie rod assembly lock nut	74	755	55
Turn pressure tube union nut	11 (13)	133(127)	8(9)
Steering gear assembly set bolt	70	714	52
Pressure feed tube assembly union nut	22 (25)	227 (250)	16(18)
Pressure feed tube clamp set bolt	9.8	100	87 in.*lbf
Pressure feed tube clamp set nut	9.8	100	87 in.*lbf
Stabilizer bracket No.1 x Suspension crossmember	27	275	20
Intermediate shaft assembly x Steering gear assembly	35	360	26

( ): For use without SST