LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Highlander Base, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (2GR-FE Except Hybrid) - System Testing, On-Vehicle Inspection, Removal, Inspection And Installation >> Active Control Engine Mount >> On-Vehicle Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

On-Vehicle Inspection

  1. INSPECT FRONT ENGINE MOUNTING INSULATOR ASSEMBLY 
    1. Inspect the front engine mounting insulator assembly.
      1. Connect Techstream to DLC3.
      2. Start the engine and turn the Techstream main switch on.
      3. Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the ACM Inhibit.
        DIAGNOSTIC NOTE TABLE

        Tester Display Test Part Control Range Diagnostic Note
        Control the ACM Inhibit ACM ON / OFF Test is possible while engine is idling
      4. Check if the front engine mounting insulator assembly operates in accordance with tester operation.

        Standard: The front engine mounting insulator assembly operates normally in accordance with tester operation. 

scientia non olet · About LEMON Manuals