LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Highlander Base, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (2GR-FE Except Hybrid) - System Testing, On-Vehicle Inspection, Removal, Inspection And Installation >> Mass Air Flow Meter >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Mass Air Flow Meter: Removal

  1. REMOVE MASS AIR FLOW METER 
    1. Disconnect the mass air flow meter connector.
    2. Remove the 2 screws and mass air flow meter.
      Fig 1: Identifying Mass Air Flow Meter Screws
      G05414038Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals