LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Highlander Base, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (2GR-FE Except Hybrid) - System Testing, On-Vehicle Inspection, Removal, Inspection And Installation >> Throttle Body >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Throttle Body: Inspection

  1. INSPECT THROTTLE BODY 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION TABLE

      Tester Connection Condition Specified Condition
      M+ (2) - M- (1) 20°C (68°F) 0.3 to 100 Ω

      If the result is not as specified, replace the throttle body.

      Fig 1: Identifying Throttle Body Connector Terminals
      G05413990Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals