April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

WARNING: This page is about a different variant/trim than selected.

CHECK DTC

Clear the DTCs (See DTC CHECK / CLEAR ).
Turn the power switch off.
Disconnect the cable from the negative battery terminal and wait for 1 minute.
Connect the cable to the negative battery terminal.
Turn the power switch on (IG).
Check for DTCs.

Result

RESULT CHART

Display (DTC Output)	Proceed to
No output	A
P060B	B
P060B and P0327, P0328, P032C, P032D, P0332, P0333, P033C, P033D	C

B: REPLACE HYBRID VEHICLE CONTROL ECU (See REMOVAL )

C: GO TO DTC (P0327, P0328, P0332, P0333 and P033D) (See DTC P0327 KNOCK SENSOR 1 CIRCUIT LOW INPUT (BANK 1 OR SINGLE SENSOR); DTC P0328 KNOCK SENSOR 1 CIRCUIT HIGH INPUT (BANK 1 OR SINGLE SENSOR); DTC P0332 KNOCK SENSOR 2 CIRCUIT LOW INPUT (BANK 2); DTC P0333 KNOCK SENSOR 2 CIRCUIT HIGH INPUT (BANK 2) )

A: CHECK FOR INTERMITTENT PROBLEMS (See CHECK FOR INTERMITTENT PROBLEMS )