April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

WARNING: This page is about a different variant/trim than selected.

CHECK DTC
1. Clear the DTCs (See DTC CHECK / CLEAR ).
2. Turn the power switch off.
3. Disconnect the cable from the negative battery terminal and wait for 1 minute.
4. Connect the cable to the negative battery terminal.
5. Turn the power switch on (IG).
6. Check for DTCs.
  OK: P060E is not present.
NG: REPLACE HYBRID VEHICLE CONTROL ECU (See REMOVAL )

OK: CHECK FOR INTERMITTENT PROBLEMS (See CHECK FOR INTERMITTENT PROBLEMS )