Problem Symptoms Table
WARNING: This page is about a different variant/trim than selected.
HINT:
- Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to the system before inspecting the suspected areas below.
PUSH-BUTTON START FUNCTION:
PUSH-BUTTON START FUNCTION
| Symptom | Suspected Area |
|---|---|
| Power source mode does not change. | AM2 Fuse |
| Power switch | |
| Wire Harness or Connector | |
| Smart Key System (Entry Function) | |
| Main Body ECU (Instrument Panel Junction Block) | |
| ACC Relay | |
| IG1 Relay | |
| IG2 Relay | |
| Power source mode does not change to on (READY) | Smart Key System (Entry) |
| Power switch | |
| Shift lever position sensor | |
| STOP Fuse | |
| Stop Light Switch | |
| Electrical Steering Lock Function | |
| Hybrid vehicle control ECU | |
| Engine Immobilizer System | |
| Main Body ECU (Instrument Panel Junction Block) | |
| Wire Harness or Connector | |
| Power switch indicator light does not come on. | Power Switch Indicator Light Circuit |