LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Highlander Base, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Control System (Hybrid)) >> Integration Relay >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Integration Relay: Removal

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE NO. 1 RELAY BLOCK COVER 
  2. REMOVE ENGINE ROOM JUNCTION BLOCK ASSEMBLY 
    1. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and disconnect the engine room junction block assembly.
      Fig 1: Identifying Engine Room Junction Block Assembly
      G05625779Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the 4 connectors.
      3. Fig 2: Locating Engine Room Junction Block Assembly Connectors
      G05415082Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals