LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Land Cruiser >> Repair and Diagnosis >> Electrical >> Gauges >> Meter >> Light Control Rheostat >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Light Control Rheostat: Installation

  1. INSTALL LIGHT CONTROL RHEOSTAT 
    1. Attach the 2 claws to install the rheostat.
  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  (See INSTALLATION  )
  3. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH  (See INSTALLATION  )
  4. INSTALL LOWER INSTRUMENT PANEL PAD SUBASSEMBLY LH  (See INSTALLATION  )
    Fig 1: Identifying Rheostat Claws
    G05635275Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION  (See INSTALLATION  )
  6. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH  (See INSTALLATION  )
  7. ENABLE AUTO TILT AWAY FUNCTION 
    1. Reset the Autoaway/Return function setting to the previous condition by changing the customize parameter (See CUSTOMIZE PARAMETERS ).
scientia non olet · About LEMON Manuals