Crankshaft Position Sensor: Testing and Inspection

1ZZ-FE ENGINE CONTROL SYSTEM: CRANKSHAFT POSITION SENSOR:

INSPECTION

1. INSPECT CRANKSHAFT POSITION SENSOR
(a) Using an ohmmeter, measure the resistance between the terminals.
Resistance:
At cold
1,630 to 2,740 Ohms
At hot
2,065 to 3,225 Ohms

NOTE: Cold and Hot mean the temperature of the coils themselves. Cold is from -10°C (14°F) to 50°C (122°F) and Hot is from 50°C (122°F) to 100°C (212°F).

HINT: If the resistance is not as specified, replace the crankshaft position sensor.