LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Sequoia Platinum, 4WD >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Brake Control/Dynamic Control Systems >> Rear Speed Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Rear Speed Sensor: Removal

  1. REMOVE REAR WHEEL 
  2. REMOVE REAR SPEED SENSOR LH 
    1. Disconnect the rear speed sensor connector.
    2. Using a hexagon wrench, remove the bolt and the rear speed sensor.
      Fig 1: Locating Rear Speed Sensor LH
      G05649611Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals