LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Tacoma PreRunner, 2D Pickup >> Repair and Diagnosis >> Engine Performance >> Engine Control System (2TR-FE) >> Accelerator Pedal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Accelerator Pedal: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE ACCELERATOR PEDAL ROD ASSEMBLY 
    1. Disconnect the accelerator position sensor connector.
      2. Fig 1: Locating Accelerator Position Sensor Connector And Accelerator Pedal Bolts
      G05198037Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 bolts, then remove the accelerator pedal.
scientia non olet · About LEMON Manuals