LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2008 >> Yaris Base, 2D Hatchback, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control System (1NZ-FE) >> Camshaft Position Sensor >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor: Inspection

  1. INSPECT CAMSHAFT POSITION SENSOR 
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

        Standard resistance 

        TEMPERATURE SPECIFIED CONDITION CHART

        Temperature Specified Condition
        Cold 1,630 to 2,740 Ω
        Hot 2,065 to 3,225 Ω
        Fig 1: Identifying Resistance Between Terminals
        G04828387Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        HINT:

        In the table above, the terms Cold and Hot refer to the temperature of the coils. Cold means approximately -10 to 50°C (14 to 122°F). Hot means approximately 50 to 100°C (122 to 212°F).

        If the resistance is not as specified, replace the camshaft position sensor.

scientia non olet · About LEMON Manuals