Inspection Procedure

WARNING: This page is about a different car, the 2008 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

CHECK NAVIGATION CONTROLLER
1. Check for foreign matter around the switches that might prevent operation.
  OK: No foreign matter is found.
NG: REMOVE ANY FOREIGN OBJECT

OK: Go to Next Step
CHECK REMOTE COMMANDER CHECK (DISPLAY CHECK MODE)
1. Enter the "DISPLAY CHECK MODE " .
2. Operate the abnormal switch and check if the switch name and status are correctly displayed.
  OK: The switch name and status are correctly displayed as operated.
NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE

Fig 1: Screen Display - Remote Commander Check
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

OK : REPLACE MULTI-DISPLAY