Network Gateway Ecu: Installation
WARNING: This page is about a different car, the 2008 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL NETWORK GATEWAY ECU
- INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY (w/ Front Passenger Airbag) (See INSTALLATION )
- CENTER SPIRAL CABLE (See INSTALLATION )
- INSTALL STEERING WHEEL ASSEMBLY (See INSTALLATION )
- INSTALL STEERING PAD (See INSTALLATION )
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- PERFORM SYSTEM INITIALIZE (See INSTALLATION )
- INSPECT STEERING PAD (See INSTALLATION )
- INSPECT SRS WARNING LIGHT (See INSTALLATION )