LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Camry Base, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control System (2AZ-FE) (Except Hybrid) >> Engine Coolant Temperature Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Coolant Temperature Sensor: Installation

  1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR 
    1. Install a new gasket onto the engine coolant temperature sensor.
    2. Using SST, install the engine coolant temperature sensor.

      SST 09817-33190 

      Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf) 

    3. Connect the engine coolant temperature sensor connector.
      Fig 1: Installing Engine Coolant Temperature Sensor
      G04973367Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY  (See INSTALLATION )
  3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (See  INSTALLATION   ) 
  4. INSTALL AIR CLEANER INLET ASSEMBLY  (See INSTALLATION )
  5. ADD ENGINE COOLANT  (See ON-VEHICLE INSPECTION )
  6. CHECK FOR ENGINE COOLANT LEAKS  (See ON-VEHICLE INSPECTION )
  7. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY  (See INSTALLATION )
scientia non olet · About LEMON Manuals