Transfer Assembly: Installation

INSTALL TRANSFER ASSEMBLY
1. Install the transfer onto the transmission.
2. Install the 2 clamps and 8 bolts.
  Torque: 24 N*m (244 kgf*cm, 17 ft.*lbf)
INSTALL AUTOMATIC TRANSMISSION ASSEMBLY
1. Install the automatic transmission (see INSTALLATION ).
INSTALL LOWER TRANSFER CASE PROTECTOR
1. Install the protector with the 4 bolts.
  Torque: 18 N*m (183 kgf*cm, 13 ft.*lbf)
  
  Fig 1: Identifying Transfer Case Lower Protector Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
ADD TRANSFER OIL (See INSPECTION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)
PERFORM INITIALIZATION
1. Perform initialization (See INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
CHECK FOR TRANSFER OIL LEAKAGE