LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Land Cruiser >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System - Circuit Tests And Service Information >> Camshaft Position Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Camshaft Position Sensor: Removal

  1. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
  2. REMOVE AIR CLEANER HOSE ASSEMBLY  (See REMOVAL )
  3. REMOVE CAMSHAFT POSITION SENSOR 
    1. Disconnect the sensor connector.
    2. Remove the bolt and sensor.
      Fig 1: Locating Sensor Connector Bolts
      G05628248Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE VVT SENSOR 
    1. Disconnect the 4 sensor connectors.
    2. Remove the 4 bolts and 4 sensors.
      Fig 2: Locating VVT Sensor Bolts
      G05628249Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals