LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Land Cruiser >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System - Circuit Tests And Service Information >> Ignition Coil And Spark Plug >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Ignition Coil And Spark Plug: Removal

  1. REMOVE NO. 2 ENGINE UNDER COVER  (See REMOVAL )
  2. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
  3. REMOVE AIR CLEANER HOSE ASSEMBLY  (See REMOVAL )
  4. REMOVE AIR CLEANER ASSEMBLY  (See REMOVAL )
  5. DISCONNECT WATER BY-PASS PIPE ASSEMBLY 
    1. Remove the 2 bolts and disconnect the water bypass pipe from the cylinder head cover and timing chain cover.
      Fig 1: Locating Water Bypass Pipe
      G05628260Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 3 bolts and disconnect the water bypass pipe from the cylinder head cover.
      Fig 2: Locating Water Bypass Pipe With Bolts
      G05628261Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE IGNITION COIL ASSEMBLY 
    1. Disconnect the 8 ignition coil connectors.
    2. Remove the 8 bolts and 8 ignition coils.
  7. REMOVE SPARK PLUG 
    1. Remove the 8 spark plugs.
scientia non olet · About LEMON Manuals