LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Land Cruiser >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System - Circuit Tests And Service Information >> Power Steering Oil Pressure Switch >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Steering Oil Pressure Switch: Removal

  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH  (See REMOVAL )
  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH  (See REMOVAL )
  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY  (See REMOVAL )
  4. REMOVE AIR CLEANER HOSE ASSEMBLY  (See REMOVAL )
  5. REMOVE AIR CLEANER ASSEMBLY  (See REMOVAL )
  6. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
  7. REMOVE FAN AND GENERATOR V BELT  (See REMOVAL )
  8. DRAIN POWER STEERING FLUID 
  9. REMOVE FRONT WHEEL 
  10. REMOVE FRONT FENDER APRON SEAL FRONT RH  (See REMOVAL )
  11. REMOVE POWER STEERING OIL PRESSURE SWITCH 
    1. Disconnect the switch connector.
    2. Using a 24 mm deep socket wrench, remove the oil pressure switch.
    3. Remove the O-ring.
      Fig 1: Locating Power Steering Oil Pressure Switch Connector
      G05628296Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals