LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Matrix Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Engine Fuel System (2ZR-FE) >> Fuel Pressure Regulator >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Fuel Pressure Regulator: Installation

  1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY 
    1. Apply gasoline to 2 new O-rings and then install them to the fuel pressure regulator assembly.
      Fig 1: Locating Fuel Pressure Regulator Assembly O-Rings
      G06009755Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the fuel pressure regulator assembly.
  2. INSTALL FUEL PUMP  (See INSTALLATION  )
  3. INSTALL FUEL SENDER GAUGE ASSEMBLY  (See INSTALLATION )
  4. INSTALL FUEL SUCTION TUBE ASSEMBLY 
    1. Install the fuel suction tube assembly to the fuel tank assembly (See INSTALLATION  ).
    Fig 2: Locating Fuel Pressure Regulator Assembly
    G06009757Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  6. INSPECT FOR FUEL LEAK  (See ON-VEHICLE INSPECTION )
scientia non olet · About LEMON Manuals