DTC Check / Clear

CHECK DTC
1. Connect the Techstream to the DLC3.
2. Turn the power switch ON (IG).
3. Read the DTCs by following the prompts on the Techstream screen.
  HINT:
  
  Refer to the tester operator's manual for further details.
CLEAR DTC
1. Connect the Techstream to the DLC3.
2. Turn the power switch ON (IG).
3. Erase the DTCs by following the prompts on the tester screen.
  HINT:
  
  Refer to the Techstream operator's manual for further details.