Data List / Active Test
- DATA LIST
HINT:
Using the Techstream's DATA LIST allows the status of a switch, sensor, actuator and other items to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.
- Connect Techstream to the DLC3.
- Turn the ignition switch on.
- Read the DATA LIST.
D_SEAT (Position control ECU and switch assembly)
DATA LISTTester Display Measurement Item/Range Normal Condition Reclining Rear Reclining switch signal (Rearward)/ ON or OFF ON: Reclining switch (Rearward) is ON
OFF: Reclining switch (Rearward) is OFFReclining Front Reclining switch signal (Forward)/ ON or OFF ON: Reclining switch (Forward) is ON
OFF: Reclining switch (Forward) is OFFFront Vertical Down Front vertical switch signal (Downward)/ ON or OFF ON: Front vertical switch (Downward) is ON
OFF: Front vertical switch (Downward) is OFFFront Vertical Up Front vertical switch signal (Upward)/ ON or OFF ON: Front vertical switch (Upward) is ON
OFF: Front vertical switch (Upward) is OFFLifter Switch Down Lifter switch signal (Downward)/ ON or OFF ON: Lifter switch (Downward) is ON
OFF: Lifter switch (Downward) is OFFLifter Switch Up Lifter switch signal (Upward)/ ON or OFF ON: Lifter switch (Upward) is ON
OFF: Lifter switch (Upward) is OFFSlide Rear Sliding switch signal (Rearward)/ ON or OFF ON: Sliding switch (Rearward) is ON
OFF: Sliding switch (Rearward) is OFFSlide Front Sliding switch signal (Forward)/ ON or OFF ON: Sliding switch (Forward) is ON
OFF: Sliding switch (Forward) is OFFPower Voltage Power supply for position control ECU and switch assembly/ MIN: 0 V, MAX: 19.89 V Within range from 11 to 14 V Ignition Switch Ignition switch position/ ON or OFF ON: Ignition switch is ON
OFF: Ignition switch is OFFKSW Switch Key unlock warning switch signal/ ON or OFF ON: Key is in ignition key cylinder
OFF: Key is not in ignition key cylinderDCTY Switch Door courtesy light switch signal/ ON or OFF ON: Driver side door is open
OFF: Driver side door is closedP Switch Shift lever position P signal/ ON or OFF ON: Shift lever in P position
OFF: Shift lever in any position except PM2 Switch Seat memory M2 switch signal/ ON or OFF ON: Seat memory M2 switch is ON
OFF: Seat memory M2 switch is OFFM1 Switch Seat memory M1 switch signal/ ON or OFF ON: Seat memory M1 switch is ON
OFF: Seat memory M1 switch is OFFSET Switch Seat memory set switch signal/ ON or OFF ON: Seat memory set switch is ON
OFF: Seat memory set switch is OFFSlide Position Seat sliding position/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 Reclining Position Seatback position/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 Front Vertical Position Seat front vertical position/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 Lifter Position Seat lifter position/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 Memory No 1 Driving position memorized with seat memory switch M1/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorizedMemory No 2 Driving position memorized with seat memory switch M2/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorizedSeat Memory No 1 Seat position memorized with seat memory switch M1/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorizedSeat Memory No 2 Seat position memorized with seat memory switch M2/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorizedDriver Mirror Memory No 1 Driver side mirror position memorized with seat memory switch M1/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorizedDriver Mirror Memory No 2 Driver side mirror position memorized with seat memory switch M2/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorizedPassenger Mirror Memory No 1 Front passenger side mirror position memorized with seat memory switch M1/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorizedPassenger Mirror Memory No 2 Front passenger side mirror position memorized with seat memory switch M2/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorizedSlide Pos Mem No 1 Seat sliding position memorized with seat memory switch M1/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 Reclining Pos Mem No 1 Seatback position memorized with seat memory switch M1/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 Front Vrtcl Pos Mem No 1 Front vertical position memorized with seat memory switch M1/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 Lifter Pos Mem No 1 Lifter position memorized with seat memory switch M1/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 Slide Pos Mem No 2 Seat sliding position memorized with seat memory switch M2/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 Reclining Pos Mem No 2 Seatback position memorized with seat memory switch M2/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 Front Vrtcl Pos Mem No 2 Front vertical position memorized with seat memory switch M2/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 Lifter Pos Mem No 2 Lifter position memorized with seat memory switch M2/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 Otr(D) Pos Mem No 1 Driver side mirror position memorized with seat memory switch M1/ MIN: 0, MAX: 65535 Within range from 0 to 65535 Otr(P) Pos Mem No 1 Front passenger side mirror position memorized with seat memory switch M1/ MIN: 0, MAX: 65535 Within range from 0 to 65535 Otr(D) Pos Mem No 2 Driver side mirror position memorized with seat memory switch M2/ MIN: 0, MAX: 65535 Within range from 0 to 65535 Otr(P) Pos Mem No 2 Front passenger side mirror position memorized with seat memory switch M2/ MIN: 0, MAX: 65535 Within range from 0 to 65535
- ACTIVE TEST
HINT:
Using the Techstream's ACTIVE TEST allows the relay, VSV, actuator, and other items to be operated without removing any parts. Reading the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.
- Connect Techstream to the DLC3.
- Turn the ignition switch on.
- Perform the ACTIVE TEST by following the directions on the tester screen.
D_SEAT (Position control ECU and switch assembly)
DATA LISTTester Display Test Part Control Range Seat Reclining Test detail: reclining operation Vehicle condition: stopped FRONT/REAR Front Vertical Operation Test detail: front vertical operation Vehicle condition: stopped UP/DOWN Lifter Operation Test detail: lifter operation Vehicle condition: stopped UP/DOWN Seat Slide Operation Test detail: sliding operation Vehicle condition: stopped FRONT/REAR