How To Proceed With Troubleshooting

*: Use Techstream.

1. Vehicle Brought to Workshop 
2. Check and Clear DTCs and Freeze Frame Data* 

   HINT:

   See DTC CHECK / CLEAR  and FREEZE FRAME DATA  .

3. Problem Symptom Confirmation 

   Symptom does not occur:  Go to step  5

   Symptom occurs:  Go to step  6

4. Symptom Simulation 
5. DTC Check* 

   HINT:

   See DTC CHECK / CLEAR  .

   There is no output:  Go to step  7

   There is output:  Go to step  8

6. Problem Symptoms Table 

   HINT:

   See PROBLEM SYMPTOMS TABLE  .

   Check for fluid leakage and  Go to step  10

7. DTC Chart 

   HINT:

   See DIAGNOSTIC TROUBLE CODE CHART  .

8. Circuit Inspection* 
9. Identification of Problem 
10. Repair 
11. Confirmation Test* 

    End