Cruise Control Main Switch: Installation

WARNING: This page is about a different car, the 2009 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL CRUISE CONTROL MAIN SWITCH
1. Install the switch as shown in the illustration.
  
  Fig 1: Installing Cruise Control Main Switch
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the 2 screws.
3. Connect the connector.
INSTALL STEERING PAD (See INSTALLATION )
INSTALL LOWER NO. 3 STEERING WHEEL COVER (See DISPOSAL )
INSTALL LOWER NO. 2 STEERING WHEEL COVER (See DISPOSAL )

Fig 2: Locating Cruise Control Main Switch Connector And Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
INSPECT STEERING PAD (See DISPOSAL )
INSPECT SRS WARNING LIGHT
(See DIAGNOSIS SYSTEM )