How To Proceed With Troubleshooting

HINT:

• Use these procedures to troubleshoot the power window control system.

1. VEHICLE BROUGHT TO WORK SHOP 
2. CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK 
3. PROBLEM SYMPTOM TABLE 

   Result 

   RESULT CHART
   
   

   Result	Proceed to
   Fault is not listed in problem symptoms table	A
   Fault is listed in problem symptoms table	B

   B:  Go to step  5

   A: Go to Next Step 

4. OVERALL ANALYSIS AND TROUBLE SHOOTING* 
   1. On-vehicle Inspection (See ON-VEHICLE INSPECTION )
   2. Inspection
   3. Terminals of ECU (See TERMINALS OF ECU )
5. ADJUST, REPAIR OR REPLACEMENT 
6. CONFIRMATION TEST 

   NEXT: END