Crankshaft Position Sensor: Inspection

INSPECT CRANKSHAFT POSITION SENSOR

Check the resistance.

Using an ohmmeter, measure the resistance between the terminals.

Standard

TESTER CONNECTIONS SPECIFIED CONDITIONS CHART

Tester Connection	Specified Condition
1 (NE+) - 2 (NE-)	1,630 to 2,740 Ω at COLD
1 (NE+) - 2 (NE-)	2,065 to 3,225 Ω at HOT

Fig 1: Identifying Crankshaft Position Sensor Connector

HINT:

Cold and Hot mean the temperature of the coils themselves. Cold is from -10 to 50°C (14 to 122°F) and Hot is from 50 to 100°C (122 to 212°F).

If the result is not as specified, replace the camshaft position sensor.