LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Tacoma PreRunner, 2D Pickup >> Repair and Diagnosis >> Engine Performance >> Engine Control System (2TR-FE) >> Knock Sensor, Intake Manifold >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Knock Sensor, Intake Manifold: Inspection

  1. INSPECT KNOCK SENSOR 
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

        Standard 

        TESTER CONNECTIONS SPECIFIED CONDITIONS CHART

        Tester Connection Specified Condition
        1 (Ground) - 2 (Output) 120 to 280 kΩ at 20°C (68°F)

        If the result is not as specified, replace the knock sensor.

        Fig 1: Inspecting Knock Sensor
        G05198023Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals